ribbon microphone การใช้

• In particular they were very well known for the RB Ribbon microphone.
• Ribbon microphones are still in demand today and come in many styles.
• Lip-ribbon microphones are more efficient at noise reduction at lower frequencies.
• Walter H . Schottky and Erwin Gerlach co-invented the first ribbon microphone.
• Ribbon microphones use a thin, usually corrugated metal ribbon suspended in a magnetic field.
• The development of ribbon tweeters has more or less followed the development of ribbon microphones.
• The acoustic complexity of ribbon microphones is comparable to other types of air coupled transducers.
• In ribbon microphones, a light metal ribbon is suspended between the poles of a magnet.
• The dynamic or moving coil microphone was introduced around 1930 and the velocity or ribbon microphone in 1932.
• Uptempo drum parts were recorded with closer microphones while " spacier sections " were recorded with ribbon microphones.
• Rick Perrotta went on to found " Royer Labs ", a company that manufactures ribbon microphones.
• The R-121 Ribbon microphone contained two innovations that delivered the performance levels necessary for professional studio use.
• Ribbon microphones are similar to moving coil microphones in the sense that both produce sound by means of magnetic induction.
• Ribbon microphones are typically bidirectional, meaning that they pick up sounds equally well from either side of the microphone.
• David Royer designed his first ribbon microphone in 1997 and started the company that bears his name one year later.
• There is a common belief that connecting a dynamic or ribbon microphone to a phantom-powered input will damage it.
• Due to their bidirectional pick-up pattern, ribbon microphones are often used in pairs to produce the Blumlein Pair recording array.
• In addition to the usual choices, Kramer used Beyer M1 60 ribbon microphones, which were typically not used to record loud music.
• If the ribbon microphone is improperly wired, which is not unheard of with older microphones, this capacity can damage some ribbon elements;
• In the late 1920s, Dr . Harry F . Olson of RCA began development of the ribbon microphone, eventually using permanent magnets.